6 Ways How to Boot Your Xiaomi Android to Emergency Download mode [ EDL ]

EDL mode on Xiaomi phone a mandatory requirement when Technician will flashing. Although can using fastboot that has been widely used but sometimes do not work. Well, the other way is with EDL mode. And Now i will Explain about How to Insert your xiaomi phone into Download mode in 3 Procedure.

EDL stands for Emergency Download Mode. This mode is like an emergency door to transfer the android operating system (stock ROM) from computer to EMMC via processor Qualcom when your device is boot loop, hard brick, or dead boot. The EDL Mode feature is available on Qualcomm Snapdragon devices like Xiaomi phone.

1. Test point

is one solution to Force Enter your xiaomi Phone into Download mode, Xiaomi phone with out bootloader unlock can’t boot into EDL, so you must use Test Point Procedur.

XIaomi Redmi Note 7 Test Point
XIaomi Redmi Note 7 Test Point

Each Phone have different Pin Signal, and you should know it but Dont Worry because I will give All Xiaomi Test Point PIN.


  1. Dissambly your Phone Focus to Backdoor
  2. Put Your machine and find testpoin PIN
  3. Connect With Pinset 2 Test poin PIN or short Using Jumper or Solder
  4. Now Connect You Machine With USB cable Data to Computer or Laptop

2. Boot Into EDL Mode Using ADB Commands

ADB (Android Debug Bridge) can be used if your device is on normally. you must Enable USB Debugging the device and connect to the computer. Once the computer is allowed to recognize the device, you can write commands for the device to enter EDL Mode. you need Minimal ADB and Fastboot software to write the commands from PC using CMD methode.

How to Enable ADB Commands Setting ?

  • You must Active USB debugging on Developer Option, but before It you must Tur on Developer option, Bellow Guide to Active Developer Option and USB debuging.
  • Several Model like As Redmi 4a, Redmi 4x and Other model must Unlock Bootloader.
  1. Tur on your Xiaomi Phone android
  2. Open Setting and Click About Phone
  3. Tap 7x MIUI VERSION untill Apear message “You have developer option” on your Phone, Press back to See result
  4. Press Settings → Additional settings.
  5. Select Developer options
  6. Now Enable USB Debugging and OEM unlocking ==> Just Cheklist
  7. Connect the device to the computer, if the message “Allow USB Debugging” appears on the phone screen click OK.
  8. Open the installation directory of the Minimal ADB and Fastboot on C:\Program Files (x86)\Minimal ADB and Fastboot.
  9. Press the Shift key and Right click and then select Open command window here to display the command prompt screen.
  10. Type adb reboot edl and press Enter, Your phone must Automatically screen will dim as dead, it’s a sign of your phone has gone into EDL Mode.
  11. Go to Device Manager [ My Computer → Right Click → Device Manager ] of your Windows computer and check on Ports. If Qualcomm HS USB Qdloader 9008 detected it means the driver is installed properly.

3. From Fastboot

The Minimum ADB and Fastboot tool must Installed Properly but compared the first way we have to go into Fasboot Mode first and then yo can go to EDL Mode [ Emergency Download ].

  1. Turn off your phone.
  2. Go to Fastboot by press and Hold Power and Volume Down buttons simultaneously until Xiaomi ‘rabbit’ image appears.
  3. Connect your Xiaomi phone to the computer using Cable Data.
  4. Open the Minimal ABD and Fastboot command prompt, the same way as for point 7 on the first method.
  5. Type Fastboot Devices to Chek your Phone, When Conected you Must See Device Code
  6. Type fasboot oem edl and automatically your phone will go to EDL Mode.Fastboot OEM EDL
  7. Now your Phone must Blank, Please check On device manager to See Device Detected or No…

4. Combination Buttons

Keep using the Minimum ADB and Fastboot tool but compared the first way we have to go into Fasboot Mode first and then to EDL Mode.

  1. Turn off your phone.
  2. Now plug one end of the USB Cable into the PC port and the other end does not connect to the phone.
  3. Press the Volume Up and Power buttons and immediately connect the other end of USB Cable to the phone.
  4. Automatically the phone will go to EDL Mode with LED lights will light up blinking.

5. Deep Flash Cable

You can buy this tool at an online store or build it yourself. Your Qualcomm cell phone will be forced into Qualcomm 9008 mode even if the bootloader is locked. Supports all Qualcomm phones such as Redmi 3, Redmi Note 3, Mi4C, Mi4I, MI5, Lenovo A6000, Andromax G2, and so forth. Also deep flash cable ready for Samsung android.

6. Batch Command Script

Batch Command Prompt can work to forced your Xiaomi phone Boot into EDL mode, Batch Command Work under windows Command Prompt with Normal Mode, Or Fastboot mode. but both Procedure Must UBL The phone.

And this Tool EDL forced File for Several Mode.

  1. RedMI Note 4 EDL Mote Tool Only Work on Qualcom Model –> Redmi Note 4x , Pro, and Prime
  2. Xiaomi Redmi Note 3 Edl mode Tool EDL mode V2
  3. Redmi 4a, 4x, 4X Prime, Redmi 4 Auto edl mode by AsFLY

Leave a Reply

Your email address will not be published. Required fields are marked *