How to Flash Android ( Mediatek ) with Miracle Box Bin File – On this page, you we will Guide you about How to Flash Android with Miracle Box Stock Bin file ( Backup ROM ). step-by-step guide on how to flash a firmware in .bin format to a Mediatek Android device using Miracle Box. Bin format firmware are single files and significantly larger than scatter format in many cases

Requirements and preparation

  • A Windows PC
  • USB Cable
  • USB Driver Drivers are to ensure that your PC can communicate with the phone effectively for flashing to occur. First, install Mediatek VCOM drivers
  • Miracle BOX App
  • Phone And Make sure the battery Capacity more than 50% to prevent Failed when Flashing.

How to Flash android use Miracle Box Bin Stock ROM [ Backup file ] with out scatter file

# Install USB Driver

# Extract Downloaded Stock ROM using Winrar, Winzip or 7zip App

# Open Miracle BOX

# Wait untill Miracle Box Software opens to the Dashboard

# Choose Chipset Typel ex : MTK or Mediatek

Choose Chipset Phone

# Choose Mediatek Series model Ex MT6735

Chipset Model

# Select Folder Icon Located and Choose Extracted Firmware File

Choose Firmware File
Choose Firmware File

# Click Start Button

# Turn Off your Phone and connect to PC Using Compatible USB Cable Miracle Box should detect the phone

# When device Detected Miracle box should begin flashing the firmware, wait till it gets to 100%

# Once it gets to 100%, close Miracle box and disconnect the phone


Congratulation Now Your Phone already Succes FLashing

Notes :

# That’s basically how to flash a Mediatek Android phone’s firmware using Miracle box

# If Flashing failed may be Your Phone damage by Hardware not Firmware. or try using other tool and firmware file

# Please backup before start Flashing cause all of your data on the phone will be erased.

Leave a Reply

Your email address will not be published. Required fields are marked *